RL-GHN-COAX-MIB DEFINITIONS ::= BEGIN IMPORTS enterprises, IpAddress FROM RFC1155-SMI OBJECT-TYPE FROM RFC-1212 DisplayString, PhysAddress FROM RFC1213-MIB TRAP-TYPE FROM RFC-1215; readyLinks OBJECT IDENTIFIER ::= {enterprises 29763} ghn OBJECT IDENTIFIER ::= {readyLinks 8} switch OBJECT IDENTIFIER ::= {ghn 1} rliGhn OBJECT IDENTIFIER ::= {ghn 3} alarm OBJECT IDENTIFIER ::= {ghn 4} rliGhnEndPointVLAN OBJECT IDENTIFIER ::= {rliGhn 7} rliGhnNodeFirmware OBJECT IDENTIFIER ::= {rliGhn 8} rliGhnDMFirmware OBJECT IDENTIFIER ::= {rliGhnNodeFirmware 1} rliGhnEPFirmware OBJECT IDENTIFIER ::= {rliGhnNodeFirmware 2} rliGhnFirmware OBJECT IDENTIFIER ::= {rliGhnNodeFirmware 3} rliGhnCommonNodeConfig OBJECT IDENTIFIER ::= {rliGhn 9} rliGhnExtraCustomParams OBJECT IDENTIFIER ::= {rliGhn 10} rliSysInformation OBJECT IDENTIFIER ::= {switch 1} rliGlobalSwitch OBJECT IDENTIFIER ::= {switch 2} rliSwitchQos OBJECT IDENTIFIER ::= {switch 3} rliQoSSchedulingMechanism OBJECT IDENTIFIER ::= {rliSwitchQos 4} rliSwitchMirror OBJECT IDENTIFIER ::= {switch 4} rliAdministration OBJECT IDENTIFIER ::= {switch 5} rliSwitchStatus OBJECT IDENTIFIER ::= {switch 6} rliSwitchVlan OBJECT IDENTIFIER ::= {switch 7} rliSysMemory OBJECT IDENTIFIER ::= {rliSysInformation 2} rliSysBasicInformation OBJECT IDENTIFIER ::= {rliSysInformation 5} rliFirmwareUpdate OBJECT IDENTIFIER ::= {rliAdministration 3} rliBackupConfiguration OBJECT IDENTIFIER ::= {rliAdministration 4} rliRestoreConfiguration OBJECT IDENTIFIER ::= {rliAdministration 5} rliPing OBJECT IDENTIFIER ::= {rliAdministration 6} rliSNTP OBJECT IDENTIFIER ::= {rliAdministration 7} rliIPConfiguration OBJECT IDENTIFIER ::= {rliAdministration 8} rliSyslogServer OBJECT IDENTIFIER ::= {rliAdministration 9} rliTrapIDs OBJECT IDENTIFIER ::= {switch 911} PortList ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Each octet within this value specifies a set of eight ports, with the first octet specifying ports 1 through 8, the second octet specifying ports 9 through 16, etc. Within each octet, the most significant bit represents the lowest numbered port, and the least significant bit represents the highest numbered port. Thus, each port of the bridge is represented by a single bit within the value of this object.If that bit has a value of '1' then that port is included in the set of ports; the port is not included if its bit has a value of '0'." SYNTAX OCTET STRING rliGhnNotchTable OBJECT-TYPE SYNTAX SEQUENCE OF RliGhnNotchEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of G.hn notch entries." ::= { rliGhn 3 } rliGhnNotchEntry OBJECT-TYPE SYNTAX RliGhnNotchEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of G.hn notch entries." INDEX { rliGhnNotchIndex } ::= { rliGhnNotchTable 1 } RliGhnNotchEntry ::= SEQUENCE { rliGhnNotchIndex INTEGER, rliGhnNotchStartFreq INTEGER, rliGhnNotchStopFreq INTEGER, rliGhnNotchDepth INTEGER, rliGhnNotchStatus INTEGER } rliGhnNotchIndex OBJECT-TYPE SYNTAX INTEGER (1..10) ACCESS read-only STATUS mandatory DESCRIPTION "the notch index." ::= { rliGhnNotchEntry 1 } rliGhnNotchStartFreq OBJECT-TYPE SYNTAX INTEGER (3000..100000) ACCESS read-write STATUS mandatory DESCRIPTION "The start frequency (KHz) of the notch." ::= { rliGhnNotchEntry 2 } rliGhnNotchStopFreq OBJECT-TYPE SYNTAX INTEGER (3000..100000) ACCESS read-write STATUS mandatory DESCRIPTION "The stop frequency (KHz) of the notch." ::= { rliGhnNotchEntry 3 } rliGhnNotchDepth OBJECT-TYPE SYNTAX INTEGER (1..40) ACCESS read-write STATUS mandatory DESCRIPTION "The depth (dB) of the notch." ::= { rliGhnNotchEntry 4 } rliGhnNotchStatus OBJECT-TYPE SYNTAX INTEGER{ valid(1), createRequest(2), underCreation(3), invalid(4)} ACCESS read-create STATUS mandatory DESCRIPTION "The status of this conceptual row in the rliGhnNotchTable. An entry in this table is not qualified for activation until instances of all corresponding columns have been initialized, either through default values, or through Set operations. The rliGhnNotchStartFreq, rliGhnNotchStopFreq and rliGhnNotchDepth objects must be explicitly set. There is no restriction on setting columns in this table when the value of rliGhnNotchStatus is active(1)." ::= { rliGhnNotchEntry 5 } rliGhnNodeInfoTable OBJECT-TYPE SYNTAX SEQUENCE OF RliGhnNodeInfoEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of node information entry." ::= { rliGhn 5 } rliGhnNodeInfoEntry OBJECT-TYPE SYNTAX RliGhnNodeInfoEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Node information entry." INDEX { rliGhnNodePortIDIndex, rliGhnNodeInfoIndex} ::= { rliGhnNodeInfoTable 1 } RliGhnNodeInfoEntry ::= SEQUENCE { rliGhnNodePortIDIndex INTEGER, rliGhnNodeInfoIndex INTEGER, rliGhnNodeInfoLocalInterface DisplayString, rliGhnNodeInfoNodeName DisplayString, rliGhnNodeInfoLocation DisplayString, rliGhnNodeInfoIPAddress IpAddress, rliGhnNodeInfoMacAddress PhysAddress, rliGhnNodeInfoRole INTEGER, rliGhnNodeInfoNodeID INTEGER, rliGhnNodeInfoUSDSRatio INTEGER, rliGhnNodeInfoEthService INTEGER, rliGhnNodeInfoFirmwareVersion DisplayString, rliGhnNodeInfoDHCPv4Client INTEGER, rliGhnNodeInfoSubnetMask IpAddress, rliGhnNodeInfoGateway IpAddress, rliGhnNodeInfoDNSAddress IpAddress, rliGhnNodeInfoDHCPv6Client INTEGER, rliGhnNodeInfoIPv6Address DisplayString, rliGhnNodeInfoIPv6prefix INTEGER, rliGhnNodeInfoIPv6DefaultGateway DisplayString, rliGhnNodeInfoIPv6DNS DisplayString, rliGhnNodeInfoIPv6AdditionalAddress1 DisplayString, rliGhnNodeInfoIPv6AdditionalPrefix1 INTEGER, rliGhnNodeInfoIPv6AdditionalAddress2 DisplayString, rliGhnNodeInfoIPv6AdditionalPrefix2 INTEGER, rliGhnNodeInfoIPv6AdditionalAddress3 DisplayString, rliGhnNodeInfoIPv6AdditionalPrefix3 INTEGER, rliGhnNodeInfoIPv6AdditionalAddress4 DisplayString, rliGhnNodeInfoIPv6AdditionalPrefix4 INTEGER, rliGhnNodeInfoIPv6LinkLocalAddress4 DisplayString, rliGhnNodeInfoIPv6LinkLocalPrefix4 INTEGER, rliGhnNodeInfoIPv6SLAACAddress4 DisplayString, rliGhnNodeInfoIPv6SLAACPrefix4 INTEGER, rliGhnNodeInfoVLANsetting DisplayString, rliGhnNodeInfoMulticastSnoopingType INTEGER, rliGhnNodeInfoBroadcastIGMPMLDAllowed INTEGER, rliGhnNodeInfoReboot INTEGER, rliGhnNodeInfoEthClientMAC DisplayString, rliGhnNodeInfoUpTime DisplayString, rliGhnNodeInfoFactoryReset INTEGER, rliGhnNodeInfoSerialNumber DisplayString, rliGhnNodeInfoPHYSpeed DisplayString, rliGhnNodeInfoTxCH1PowerLevel INTEGER, rliGhnNodeInfoTxCH2PowerLevel INTEGER, rliGhnNodeInfoRxCH1PowerLevel INTEGER, rliGhnNodeInfoRxCH2PowerLevel INTEGER, rliGhnNodeInfoUpdateFirmware INTEGER, rliGhnNodeInfoUpdateStatus DisplayString, rliGhnNodeInfoDomainMastID INTEGER, rliGhnNodeInfoResetCause DisplayString, rliGhnNodeInfoCPUUsage INTEGER, rliGhnNodeInfoFreeMemory INTEGER, rliGhnNodeInfoTotalMemory INTEGER, rliGhnNodeInfoAsic INTEGER, rliGhnNodeInfoAsicRev INTEGER, rliGhnNodeInfoHWversion DisplayString, rliGhnNodeInfoHWProduct DisplayString, rliGhnNodeInfoChipset DisplayString, rliGhnNodeInfoPowerSaving INTEGER, rliGhnNodeInfoPairPassword DisplayString, rliGhnNodeInfoEthAEnable INTEGER, rliGhnNodeInfoEthALink INTEGER, rliGhnNodeInfoEthAIFACEType DisplayString, rliGhnNodeInfoEthAMode DisplayString, rliGhnNodeInfoEthAInteralPHY INTEGER, rliGhnNodeInfoEthAMIIMMaster INTEGER, rliGhnNodeInfoEthAAUTONEG INTEGER, rliGhnNodeInfoEthACAP1000Fd INTEGER, rliGhnNodeInfoEthACAP100Fd INTEGER, rliGhnNodeInfoEthACAP100Hd INTEGER, rliGhnNodeInfoEthACAP10Fd INTEGER, rliGhnNodeInfoEthACAP10Hd INTEGER, rliGhnNodeInfoEthADuplex INTEGER, rliGhnNodeInfoEthAPHYAddr INTEGER, rliGhnNodeInfoEthAPHYID INTEGER, rliGhnNodeInfoEthASpeed INTEGER, rliGhnNodeInfoLogfileEnable INTEGER, rliGhnNodeInfoLogfileDataInterval INTEGER, rliGhnNodeInfoLogfileDest INTEGER, rliGhnNodeInfoLogfileFTPHost DisplayString, rliGhnNodeInfoLogfileFTPLogin DisplayString, rliGhnNodeInfoLogfileFTPPassWord DisplayString, rliGhnNodeInfoLogfileuploadInterval INTEGER, rliGhnNodeInfoLogfileSendFile INTEGER, rliGhnNodeInfoLogfileStatus DisplayString, rliGhnNodeInfoMacAccessList DisplayString, rliGhnNodeInfoFactoryResetPassword DisplayString, rliGhnNodeInfoSystemPassword DisplayString, rliGhnNodeInfoResetSystemPassword INTEGER, rliGhnNodeInfoCustomParam1Value DisplayString, rliGhnNodeInfoCustomParam2Value DisplayString, rliGhnNodeInfoCustomParam3Value DisplayString, rliGhnNodeInfoTemperature DisplayString } rliGhnNodePortIDIndex OBJECT-TYPE SYNTAX INTEGER(1..24) ACCESS read-only STATUS mandatory DESCRIPTION "G.hn Port ID." ::= { rliGhnNodeInfoEntry 1 } rliGhnNodeInfoIndex OBJECT-TYPE SYNTAX INTEGER(1..32) ACCESS read-only STATUS mandatory DESCRIPTION "G.hn Node Index of each G.hn port." ::= { rliGhnNodeInfoEntry 2 } rliGhnNodeInfoLocalInterface OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "local interface ID of node." ::= { rliGhnNodeInfoEntry 3 } rliGhnNodeInfoNodeName OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "Name of node." ::= { rliGhnNodeInfoEntry 4 } rliGhnNodeInfoLocation OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "Location of node." ::= { rliGhnNodeInfoEntry 5 } rliGhnNodeInfoIPAddress OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "IP Address of node." ::= { rliGhnNodeInfoEntry 6 } rliGhnNodeInfoMacAddress OBJECT-TYPE SYNTAX PhysAddress ACCESS read-only STATUS mandatory DESCRIPTION "MAC Address of node." ::= { rliGhnNodeInfoEntry 7 } rliGhnNodeInfoRole OBJECT-TYPE SYNTAX INTEGER{ auto(0), dm(1), ep(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Role of node. DM is domain master. EP is end point." ::= { rliGhnNodeInfoEntry 8 } rliGhnNodeInfoNodeID OBJECT-TYPE SYNTAX INTEGER(1..512) ACCESS read-only STATUS mandatory DESCRIPTION "ID of node." ::= { rliGhnNodeInfoEntry 9 } rliGhnNodeInfoUSDSRatio OBJECT-TYPE SYNTAX INTEGER (30..70) ACCESS read-write STATUS mandatory DESCRIPTION "Upstream/Downstream ratio of node." ::= { rliGhnNodeInfoEntry 10 } rliGhnNodeInfoEthService OBJECT-TYPE SYNTAX INTEGER{ enable(1), disable(2) } ACCESS read-only STATUS mandatory DESCRIPTION "Ethernet interface service state of node." ::= { rliGhnNodeInfoEntry 11 } rliGhnNodeInfoFirmwareVersion OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "Firmware version of node." ::= { rliGhnNodeInfoEntry 12 } rliGhnNodeInfoDHCPv4Client OBJECT-TYPE SYNTAX INTEGER{ enable(1), disable(0) } ACCESS read-write STATUS mandatory DESCRIPTION "DHCPv4 client." ::= { rliGhnNodeInfoEntry 13 } rliGhnNodeInfoSubnetMask OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "Subnet Mask of node." ::= { rliGhnNodeInfoEntry 14 } rliGhnNodeInfoGateway OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "Gateway of node." ::= { rliGhnNodeInfoEntry 15 } rliGhnNodeInfoDNSAddress OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "DNS Address of node." ::= { rliGhnNodeInfoEntry 16 } rliGhnNodeInfoDHCPv6Client OBJECT-TYPE SYNTAX INTEGER{ enable(1), disable(0) } ACCESS read-write STATUS mandatory DESCRIPTION "DHCPv6 client." ::= { rliGhnNodeInfoEntry 17 } rliGhnNodeInfoIPv6Address OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "IPv6 Address." ::= { rliGhnNodeInfoEntry 18 } rliGhnNodeInfoIPv6prefix OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "DHCPv6 Prefix." ::= { rliGhnNodeInfoEntry 19 } rliGhnNodeInfoIPv6DefaultGateway OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "IPv6 Default Gateway." ::= { rliGhnNodeInfoEntry 20 } rliGhnNodeInfoIPv6DNS OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "IPv6 DNS." ::= { rliGhnNodeInfoEntry 21 } rliGhnNodeInfoIPv6AdditionalAddress1 OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "IPv6 Additional Address1." ::= { rliGhnNodeInfoEntry 22 } rliGhnNodeInfoIPv6AdditionalPrefix1 OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "IPv6 Additional prefix." ::= { rliGhnNodeInfoEntry 23 } rliGhnNodeInfoIPv6AdditionalAddress2 OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "IPv6 Additional Address2." ::= { rliGhnNodeInfoEntry 24 } rliGhnNodeInfoIPv6AdditionalPrefix2 OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "IPv6 Additional prefix2." ::= { rliGhnNodeInfoEntry 25 } rliGhnNodeInfoIPv6AdditionalAddress3 OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "IPv6 Additional Address3." ::= { rliGhnNodeInfoEntry 26 } rliGhnNodeInfoIPv6AdditionalPrefix3 OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "IPv6 Additional prefix3." ::= { rliGhnNodeInfoEntry 27 } rliGhnNodeInfoIPv6AdditionalAddress4 OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "IPv6 Additional Address4." ::= { rliGhnNodeInfoEntry 28 } rliGhnNodeInfoIPv6AdditionalPrefix4 OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "IPv6 Additional prefix4." ::= { rliGhnNodeInfoEntry 29 } rliGhnNodeInfoIPv6LinkLocalAddress4 OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "DNSv6 Link local Address4." ::= { rliGhnNodeInfoEntry 30 } rliGhnNodeInfoIPv6LinkLocalPrefix4 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "DNSv6 Link local Prefix4." ::= { rliGhnNodeInfoEntry 31 } rliGhnNodeInfoIPv6SLAACAddress4 OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "DNSv6 SLAAC Address4." ::= { rliGhnNodeInfoEntry 32 } rliGhnNodeInfoIPv6SLAACPrefix4 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "DNSv6 SLAAC Prefix4." ::= { rliGhnNodeInfoEntry 33 } rliGhnNodeInfoVLANsetting OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "VLAN setting:vlanenable(0/1)|vlanmode(0:none/1:access/2:trunk)|pvid(0~4095)|vlanlist(x,x,x,x,x,x,x,x,x,x,x,x,x,x,x,x)." ::= { rliGhnNodeInfoEntry 34 } rliGhnNodeInfoMulticastSnoopingType OBJECT-TYPE SYNTAX INTEGER{ igmp(0), mld(1), none(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Multicast Snooping Type." ::= { rliGhnNodeInfoEntry 35 } rliGhnNodeInfoBroadcastIGMPMLDAllowed OBJECT-TYPE SYNTAX INTEGER{ enable(1), disable(0) } ACCESS read-write STATUS mandatory DESCRIPTION "Broadcast IGMP/MLD reports Allowed." ::= { rliGhnNodeInfoEntry 36 } rliGhnNodeInfoReboot OBJECT-TYPE SYNTAX INTEGER{ enable(1) } ACCESS write-only STATUS mandatory DESCRIPTION "reboot ghn node." ::= { rliGhnNodeInfoEntry 37 } rliGhnNodeInfoEthClientMAC OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "Client MAC Address connected to the ethernet port of node." ::= { rliGhnNodeInfoEntry 38 } rliGhnNodeInfoUpTime OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "ghn node uptime." ::= { rliGhnNodeInfoEntry 39 } rliGhnNodeInfoFactoryReset OBJECT-TYPE SYNTAX INTEGER{enable(1)} ACCESS write-only STATUS mandatory DESCRIPTION "reset ghn node." ::= { rliGhnNodeInfoEntry 40 } rliGhnNodeInfoSerialNumber OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "ghn node sn." ::= { rliGhnNodeInfoEntry 41 } rliGhnNodeInfoPHYSpeed OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "ghn node PHY Speed." ::= { rliGhnNodeInfoEntry 42 } rliGhnNodeInfoTxCH1PowerLevel OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "ghn node TX CH1 power level." ::= { rliGhnNodeInfoEntry 43 } rliGhnNodeInfoTxCH2PowerLevel OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "ghn node TX CH2 power level." ::= { rliGhnNodeInfoEntry 44 } rliGhnNodeInfoRxCH1PowerLevel OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "ghn node RX CH1 power level." ::= { rliGhnNodeInfoEntry 45 } rliGhnNodeInfoRxCH2PowerLevel OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "ghn node RX CH2 power level." ::= { rliGhnNodeInfoEntry 46 } rliGhnNodeInfoUpdateFirmware OBJECT-TYPE SYNTAX INTEGER ACCESS write-only STATUS mandatory DESCRIPTION "set ghn node update firmware." ::= { rliGhnNodeInfoEntry 47 } rliGhnNodeInfoUpdateStatus OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "ghn node update status." ::= { rliGhnNodeInfoEntry 48 } rliGhnNodeInfoDomainMastID OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "ghn node domainMastID." ::= { rliGhnNodeInfoEntry 49 } rliGhnNodeInfoResetCause OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "ghn node reset cause." ::= { rliGhnNodeInfoEntry 50 } rliGhnNodeInfoCPUUsage OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "ghn node CPU usage." ::= { rliGhnNodeInfoEntry 51 } rliGhnNodeInfoFreeMemory OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "ghn node free memory." ::= { rliGhnNodeInfoEntry 52 } rliGhnNodeInfoTotalMemory OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "ghn node total memory." ::= { rliGhnNodeInfoEntry 53 } rliGhnNodeInfoAsic OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "ghn node asic." ::= { rliGhnNodeInfoEntry 54 } rliGhnNodeInfoAsicRev OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "ghn node asic rev." ::= { rliGhnNodeInfoEntry 55 } rliGhnNodeInfoHWversion OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "ghn node hardware version." ::= { rliGhnNodeInfoEntry 56 } rliGhnNodeInfoHWProduct OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "ghn node hardware product." ::= { rliGhnNodeInfoEntry 57 } rliGhnNodeInfoChipset OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "ghn node Chipset." ::= { rliGhnNodeInfoEntry 58 } rliGhnNodeInfoPowerSaving OBJECT-TYPE SYNTAX INTEGER{disable(0),enable(1)} ACCESS read-write STATUS mandatory DESCRIPTION "ghn node power saving." ::= { rliGhnNodeInfoEntry 59 } rliGhnNodeInfoPairPassword OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "ghn node pair password." ::= { rliGhnNodeInfoEntry 60 } rliGhnNodeInfoEthAEnable OBJECT-TYPE SYNTAX INTEGER{disable(0),enable(1)} ACCESS read-only STATUS mandatory DESCRIPTION "ghn node EthA enable." ::= { rliGhnNodeInfoEntry 61 } rliGhnNodeInfoEthALink OBJECT-TYPE SYNTAX INTEGER{linkdown(0),linkup(1)} ACCESS read-only STATUS mandatory DESCRIPTION "ghn node EthA link status." ::= { rliGhnNodeInfoEntry 62 } rliGhnNodeInfoEthAIFACEType OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "ghn node EthA iface type ." ::= { rliGhnNodeInfoEntry 63 } rliGhnNodeInfoEthAMode OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "ghn node EthA mode ." ::= { rliGhnNodeInfoEntry 64 } rliGhnNodeInfoEthAInteralPHY OBJECT-TYPE SYNTAX INTEGER{no(0),yes(1)} ACCESS read-only STATUS mandatory DESCRIPTION "ghn node EthA interal PHY." ::= { rliGhnNodeInfoEntry 65 } rliGhnNodeInfoEthAMIIMMaster OBJECT-TYPE SYNTAX INTEGER{no(0),yes(1)} ACCESS read-only STATUS mandatory DESCRIPTION "ghn node EthA miim master." ::= { rliGhnNodeInfoEntry 66 } rliGhnNodeInfoEthAAUTONEG OBJECT-TYPE SYNTAX INTEGER{no(0),yes(1)} ACCESS read-only STATUS mandatory DESCRIPTION "ghn node EthA autoneg." ::= { rliGhnNodeInfoEntry 67 } rliGhnNodeInfoEthACAP1000Fd OBJECT-TYPE SYNTAX INTEGER{no(0),yes(1)} ACCESS read-only STATUS mandatory DESCRIPTION "ghn node EthA 1000FD cap." ::= { rliGhnNodeInfoEntry 68 } rliGhnNodeInfoEthACAP100Fd OBJECT-TYPE SYNTAX INTEGER{no(0),yes(1)} ACCESS read-only STATUS mandatory DESCRIPTION "ghn node EthA 100FD cap." ::= { rliGhnNodeInfoEntry 69 } rliGhnNodeInfoEthACAP100Hd OBJECT-TYPE SYNTAX INTEGER{no(0),yes(1)} ACCESS read-only STATUS mandatory DESCRIPTION "ghn node EthA 100HD cap." ::= { rliGhnNodeInfoEntry 70 } rliGhnNodeInfoEthACAP10Fd OBJECT-TYPE SYNTAX INTEGER{no(0),yes(1)} ACCESS read-only STATUS mandatory DESCRIPTION "ghn node EthA 10FD cap." ::= { rliGhnNodeInfoEntry 71 } rliGhnNodeInfoEthACAP10Hd OBJECT-TYPE SYNTAX INTEGER{no(0),yes(1)} ACCESS read-only STATUS mandatory DESCRIPTION "ghn node EthA 10HD cap." ::= { rliGhnNodeInfoEntry 72 } rliGhnNodeInfoEthADuplex OBJECT-TYPE SYNTAX INTEGER{halfduplex(0),fullduplex(1)} ACCESS read-only STATUS mandatory DESCRIPTION "ghn node EthA duplex." ::= { rliGhnNodeInfoEntry 73 } rliGhnNodeInfoEthAPHYAddr OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "ghn node EthA PHY Addr." ::= { rliGhnNodeInfoEntry 74 } rliGhnNodeInfoEthAPHYID OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "ghn node EthA PHY Addr." ::= { rliGhnNodeInfoEntry 75 } rliGhnNodeInfoEthASpeed OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "ghn node EthA speed." ::= { rliGhnNodeInfoEntry 76 } rliGhnNodeInfoLogfileEnable OBJECT-TYPE SYNTAX INTEGER{disable(0),enable(1)} ACCESS read-write STATUS mandatory DESCRIPTION "ghn node Logfile enable." ::= { rliGhnNodeInfoEntry 77 } rliGhnNodeInfoLogfileDataInterval OBJECT-TYPE SYNTAX INTEGER(1..50000000) ACCESS read-write STATUS mandatory DESCRIPTION "ghn node Logfile data interval." ::= { rliGhnNodeInfoEntry 78 } rliGhnNodeInfoLogfileDest OBJECT-TYPE SYNTAX INTEGER{ftp(0),local(1)} ACCESS read-write STATUS mandatory DESCRIPTION "ghn node Logfile destination." ::= { rliGhnNodeInfoEntry 79 } rliGhnNodeInfoLogfileFTPHost OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "ghn node Logfile ftp Server host." ::= { rliGhnNodeInfoEntry 80 } rliGhnNodeInfoLogfileFTPLogin OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "ghn node Logfile ftp Server login." ::= { rliGhnNodeInfoEntry 81 } rliGhnNodeInfoLogfileFTPPassWord OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "ghn node Logfile ftp Server password." ::= { rliGhnNodeInfoEntry 82 } rliGhnNodeInfoLogfileuploadInterval OBJECT-TYPE SYNTAX INTEGER(0..50000000) ACCESS read-write STATUS mandatory DESCRIPTION "ghn node Logfile upload interval." ::= { rliGhnNodeInfoEntry 83 } rliGhnNodeInfoLogfileSendFile OBJECT-TYPE SYNTAX INTEGER{finish(0),setting(1)} ACCESS read-write STATUS mandatory DESCRIPTION "ghn node Logfile Send File." ::= { rliGhnNodeInfoEntry 84 } rliGhnNodeInfoLogfileStatus OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "ghn node Logfile status." ::= { rliGhnNodeInfoEntry 85 } rliGhnNodeInfoMacAccessList OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "ghn node mac access list." ::= { rliGhnNodeInfoEntry 86 } rliGhnNodeInfoFactoryResetPassword OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "ghn node factory reset password." ::= { rliGhnNodeInfoEntry 87 } rliGhnNodeInfoSystemPassword OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "ghn node systemPassword." ::= { rliGhnNodeInfoEntry 88 } rliGhnNodeInfoResetSystemPassword OBJECT-TYPE SYNTAX INTEGER{reset(1)} ACCESS read-write STATUS mandatory DESCRIPTION "ghn node reset system password." ::= { rliGhnNodeInfoEntry 89 } rliGhnNodeInfoCustomParam1Value OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "Custom Param1 value." ::= { rliGhnNodeInfoEntry 90 } rliGhnNodeInfoCustomParam2Value OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "Custom Param2 value." ::= { rliGhnNodeInfoEntry 91 } rliGhnNodeInfoCustomParam3Value OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "Custom Param3 value." ::= { rliGhnNodeInfoEntry 92 } rliGhnNodeInfoTemperature OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "show ghn node temperature." ::= { rliGhnNodeInfoEntry 93 } rliGhnEndPointVLANSetting OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "VLAN setting:vlanenable(0/1)|vlanmode(0:none/1:access/2:trunk)|pvid(0~4095)|vlanlist(x,x,x,x,x,x,x,x,x,x,x,x,x,x,x,x)." ::= { rliGhnEndPointVLAN 1 } rliGhnEndPointVLANReboot OBJECT-TYPE SYNTAX INTEGER{enable(1)} ACCESS write-only STATUS mandatory DESCRIPTION "reboot all ghn node." ::= { rliGhnEndPointVLAN 2 } rliGhnPortEndPointVLANTable OBJECT-TYPE SYNTAX SEQUENCE OF RliGhnPortEndPointVLANEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of port VLAN information entry." ::= { rliGhnEndPointVLAN 3 } rliGhnPortEndPointVLANEntry OBJECT-TYPE SYNTAX RliGhnPortEndPointVLANEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Port subscriber information entry." INDEX { rliGhnPortIDEndPointVLANIndex } ::= { rliGhnPortEndPointVLANTable 1 } RliGhnPortEndPointVLANEntry ::= SEQUENCE { rliGhnPortIDEndPointVLANIndex INTEGER, rliGhnPortEndPointVLANSetting DisplayString, rliGhnPortEndPointVLANReboot INTEGER } rliGhnPortIDEndPointVLANIndex OBJECT-TYPE SYNTAX INTEGER(1..24) ACCESS read-only STATUS mandatory DESCRIPTION "Port ID of port EndPoint VLAN." ::= { rliGhnPortEndPointVLANEntry 1 } rliGhnPortEndPointVLANSetting OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "VLAN setting:vlanenable(0/1)|vlanmode(0:none/1:access/2:trunk)|pvid(0~4095)|vlanlist(x,x,x,x,x,x,x,x,x,x,x,x,x,x,x,x)." ::= { rliGhnPortEndPointVLANEntry 2 } rliGhnPortEndPointVLANReboot OBJECT-TYPE SYNTAX INTEGER{enable(1)} ACCESS write-only STATUS mandatory DESCRIPTION "reboot port all ghn node." ::= { rliGhnPortEndPointVLANEntry 3 } rliGhnDMFirmwareIPAddress OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "TFTP server IP." ::= { rliGhnDMFirmware 1 } rliGhnDMFirmwareFileName OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "DMFirmware file name." ::= { rliGhnDMFirmware 2 } rliGhnDMDownload OBJECT-TYPE SYNTAX INTEGER{download(1)} ACCESS write-only STATUS mandatory DESCRIPTION "DM download file." ::= { rliGhnDMFirmware 3 } rliGhnDMDownLoadStatus OBJECT-TYPE SYNTAX INTEGER{notstart(0),downloading(1),success(2),fail(3)} ACCESS read-only STATUS mandatory DESCRIPTION "DownLoad status." ::= { rliGhnDMFirmware 4 } rliGhnDMFirmwareVersion OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "Firmware Version." ::= { rliGhnDMFirmware 5 } rliGhnEPFirmwareIPAddress OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "TFTP server IP." ::= { rliGhnEPFirmware 1 } rliGhnEPFirmwareFileName OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "EP Firmware file name." ::= { rliGhnEPFirmware 2 } rliGhnEPDownload OBJECT-TYPE SYNTAX INTEGER{download(1)} ACCESS write-only STATUS mandatory DESCRIPTION "EP download file." ::= { rliGhnEPFirmware 3 } rliGhnEPDownLoadStatus OBJECT-TYPE SYNTAX INTEGER{notstart(0),downloading(1),success(2),fail(3)} ACCESS read-only STATUS mandatory DESCRIPTION "DownLoad status." ::= { rliGhnEPFirmware 4 } rliGhnEPFirmwareVersion OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "Firmware Version." ::= { rliGhnEPFirmware 5 } rliGhnFirmwareIPAddress OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "TFTP server IP." ::= { rliGhnFirmware 1 } rliGhnFirmwareName OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "Firmware file name." ::= { rliGhnFirmware 2 } rliGhnFirmwareType OBJECT-TYPE SYNTAX INTEGER{dm(1),ep(0)} ACCESS read-write STATUS mandatory DESCRIPTION "Firmware type." ::= { rliGhnFirmware 3 } rliGhnDeviceType OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "Device Type." ::= { rliGhnFirmware 4 } rliGhnFirmwareVersion OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "Device Type." ::= { rliGhnFirmware 5 } rliGhnDownload OBJECT-TYPE SYNTAX INTEGER{download(1)} ACCESS write-only STATUS mandatory DESCRIPTION "Download file." ::= { rliGhnFirmware 6 } rliGhnDownLoadStatus OBJECT-TYPE SYNTAX INTEGER{notstart(0),downloading(1),success(2),fail(3)} ACCESS read-only STATUS mandatory DESCRIPTION "Download status." ::= { rliGhnFirmware 7 } rliGhnFirmwareListTable OBJECT-TYPE SYNTAX SEQUENCE OF RliGhnFirmwareListEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of Ghn Firmware information entry." ::= { rliGhnNodeFirmware 4 } rliGhnFirmwareListEntry OBJECT-TYPE SYNTAX RliGhnFirmwareListEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Ghn Firmware information entry." INDEX { rliGhnFirmwareListIndex} ::= { rliGhnFirmwareListTable 1 } RliGhnFirmwareListEntry ::= SEQUENCE { rliGhnFirmwareListIndex INTEGER, rliGhnFirmwareListFileName DisplayString, rliGhnFirmwareListFileType DisplayString, rliGhnFirmwareListDeviceType DisplayString, rliGhnFirmwareListFirmwareVersion DisplayString, rliGhnFirmwareListDelete INTEGER, } rliGhnFirmwareListIndex OBJECT-TYPE SYNTAX INTEGER(1..24) ACCESS read-only STATUS mandatory DESCRIPTION "FirmwareList index." ::= { rliGhnFirmwareListEntry 1 } rliGhnFirmwareListFileName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "Firmware File name." ::= { rliGhnFirmwareListEntry 2 } rliGhnFirmwareListFileType OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "Firmware Type:DM or EP." ::= { rliGhnFirmwareListEntry 3 } rliGhnFirmwareListDeviceType OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "Firmware Device Type." ::= { rliGhnFirmwareListEntry 4 } rliGhnFirmwareListFirmwareVersion OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "FirmwareVersion." ::= { rliGhnFirmwareListEntry 5 } rliGhnFirmwareListDelete OBJECT-TYPE SYNTAX INTEGER {delete(1)} ACCESS write-only STATUS mandatory DESCRIPTION "delete firmware." ::= { rliGhnFirmwareListEntry 6 } rliGhnProfile OBJECT-TYPE SYNTAX INTEGER{coax100MHz(9),wave2Coax200MHz(25)} ACCESS read-write STATUS mandatory DESCRIPTION "set all ghn profile." ::= { rliGhnCommonNodeConfig 1 } rliGhnPairPassword OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "set all ghn pairing password." ::= { rliGhnCommonNodeConfig 2 } rliGhnDHCPv4Client OBJECT-TYPE SYNTAX INTEGER{enable(1),disable(0)} ACCESS read-write STATUS mandatory DESCRIPTION "set all ghn DHCPv4 client." ::= { rliGhnCommonNodeConfig 3 } rliGhnDHCPv6Client OBJECT-TYPE SYNTAX INTEGER{enable(1),disable(0)} ACCESS read-write STATUS mandatory DESCRIPTION "set all ghn DHCPv6 client." ::= { rliGhnCommonNodeConfig 4 } rliGhnNTPEnable OBJECT-TYPE SYNTAX INTEGER{enable(1),disable(0)} ACCESS read-write STATUS mandatory DESCRIPTION "set all ghn NTP." ::= { rliGhnCommonNodeConfig 5 } rliGhnNTPServerIP OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "set all ghn NTP host." ::= { rliGhnCommonNodeConfig 6 } rliGhnNTPResyncDuration OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "set all ghn NTP Resync Duration." ::= { rliGhnCommonNodeConfig 7 } rliGhnSystemPassword OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "set all ghn System Password." ::= { rliGhnCommonNodeConfig 8 } rliGhnResetSystemPassword OBJECT-TYPE SYNTAX INTEGER{reset(1)} ACCESS write-only STATUS mandatory DESCRIPTION "set all ghn Reset System Password." ::= { rliGhnCommonNodeConfig 9 } rliGhnNodeName OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "set all ghn node name." ::= { rliGhnCommonNodeConfig 10 } rliGhnLogfileEnable OBJECT-TYPE SYNTAX INTEGER{disable(0),enable(1)} ACCESS read-write STATUS mandatory DESCRIPTION "set all ghn node Logfile enable." ::= { rliGhnCommonNodeConfig 11 } rliGhnLogfileDataInterval OBJECT-TYPE SYNTAX INTEGER(1..50000000) ACCESS read-write STATUS mandatory DESCRIPTION "set all ghn node Logfile data interval." ::= { rliGhnCommonNodeConfig 12} rliGhnLogfileDest OBJECT-TYPE SYNTAX INTEGER{ftp(0),local(1)} ACCESS read-write STATUS mandatory DESCRIPTION "set all ghn node Logfile destination." ::= { rliGhnCommonNodeConfig 13} rliGhnLogfileFTPHost OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "set all ghn node Logfile ftp Server host." ::= { rliGhnCommonNodeConfig 14 } rliGhnLogfileFTPLogin OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "set all ghn node Logfile ftp Server login." ::= { rliGhnCommonNodeConfig 15 } rliGhnLogfileFTPPassWord OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "set all ghn node Logfile ftp Server password." ::= { rliGhnCommonNodeConfig 16 } rliGhnLogfileuploadInterval OBJECT-TYPE SYNTAX INTEGER(0..50000000) ACCESS read-write STATUS mandatory DESCRIPTION "set all ghn node Logfile upload interval." ::= { rliGhnCommonNodeConfig 17 } rliGhnLogfileSendFile OBJECT-TYPE SYNTAX INTEGER{finish(0),setting(1)} ACCESS read-write STATUS mandatory DESCRIPTION "set all ghn node Logfile Send File." ::= { rliGhnCommonNodeConfig 18 } rliGhnVLAN OBJECT-TYPE SYNTAX INTEGER{disable(0),enable(1)} ACCESS read-write STATUS mandatory DESCRIPTION "set all ghn VLAN." ::= { rliGhnCommonNodeConfig 19 } rliGhnVLANMode OBJECT-TYPE SYNTAX INTEGER{access(1),trunk(2)} ACCESS read-write STATUS mandatory DESCRIPTION "set all ghn VLAN mode." ::= { rliGhnCommonNodeConfig 20 } rliGhnVLANPVID OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "set all ghn VLAN PVID." ::= { rliGhnCommonNodeConfig 21 } rliGhnVLANList OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "set all ghn VLAN List." ::= { rliGhnCommonNodeConfig 22 } rliGhnVLANApply OBJECT-TYPE SYNTAX INTEGER{aplly(1)} ACCESS read-write STATUS mandatory DESCRIPTION "set all ghn VLAN apply." ::= { rliGhnCommonNodeConfig 23 } rliGhnCustomParam1Name OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "Custom Param1 Name." ::= { rliGhnExtraCustomParams 1 } rliGhnCustomParam2Name OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "Custom Param2 Name." ::= { rliGhnExtraCustomParams 2 } rliGhnCustomParam3Name OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "Custom Param3 Name." ::= { rliGhnExtraCustomParams 3 } mac OBJECT-TYPE SYNTAX DisplayString ACCESS not-accessible STATUS mandatory DESCRIPTION "show the client MAC address ." ::= { alarm 1 } name OBJECT-TYPE SYNTAX DisplayString ACCESS not-accessible STATUS mandatory DESCRIPTION "show the client name ." ::= { alarm 2 } location OBJECT-TYPE SYNTAX DisplayString ACCESS not-accessible STATUS mandatory DESCRIPTION "show the client location." ::= { alarm 3 } rliCPUUtilization OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "CPU utilization percent (%) of the system." ::= { rliSysInformation 1 } rliMemorySize OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Memory size of the system." ::= { rliSysMemory 1} rliMemoryFree OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Memory free of the system." ::= { rliSysMemory 2 } rliMemoryUsed OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Current memory usage of the system." ::= { rliSysMemory 3 } rliFanNumber OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of fans." ::= { rliSysInformation 3 } rliFanTable OBJECT-TYPE SYNTAX SEQUENCE OF RliFanEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of fan entries. The number of entries is given by the value of fanNumber." ::= { rliSysInformation 4 } rliFanEntry OBJECT-TYPE SYNTAX RliFanEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "List each fan and its status." INDEX { rliFanIndex } ::= { rliFanTable 1 } RliFanEntry ::= SEQUENCE { rliFanIndex INTEGER, rliFanStatus INTEGER } rliFanIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "A unique index for each fan. The value rangs between 1 and the value of fanNumber." ::= { rliFanEntry 1 } rliFanStatus OBJECT-TYPE SYNTAX INTEGER{off(0),normal(1),fault(2)} ACCESS read-only STATUS mandatory DESCRIPTION "Status of a fan.Value 0 indicates a off status, value 1 indicates a normal status,while value 2 indicates an abnormal status." ::= { rliFanEntry 2 } rliHWVersion OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "System Hardware version." ::= { rliSysBasicInformation 1} rliKernelVersion OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "System Kernel version." ::= { rliSysBasicInformation 2} rliSoftwareVersion OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "System Software version." ::= { rliSysBasicInformation 3} rliBootloaderVersion OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "System Bootloader version." ::= { rliSysBasicInformation 4} rliSerialNumber OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "System Serial Number." ::= { rliSysBasicInformation 5} rliTemperature OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "System Temperature." ::= { rliSysBasicInformation 6} rliLocalDateTime OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "System Date Time." ::= { rliSysBasicInformation 7} rliSysUpTime OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "System Up Time." ::= { rliSysBasicInformation 8} alarminfor OBJECT-TYPE SYNTAX DisplayString ACCESS not-accessible STATUS mandatory DESCRIPTION "show alarm information." ::= { rliSysBasicInformation 9 } rliGlobalSave OBJECT-TYPE SYNTAX INTEGER{ enabled(1) } ACCESS write-only STATUS mandatory DESCRIPTION "Save current configuration of the system to flash." ::= { rliGlobalSwitch 1 } rliStpGlobalStatus OBJECT-TYPE SYNTAX INTEGER{ disable(0), enable-stp(1), enable-rstp(2), enable-mstp(3)} ACCESS read-write STATUS mandatory DESCRIPTION "Global status of STP. Value 0 indicates disable of global STP, value 1 indicates enable of global stp, value 2 indicates enable of global RSTP, value 3 indicates enalbe of global MSTP." ::= { rliGlobalSwitch 2 } rliQosLineRateTable OBJECT-TYPE SYNTAX SEQUENCE OF RliQosLineRateEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of line-rate QoS entries." ::= { rliSwitchQos 1 } rliQosLineRateEntry OBJECT-TYPE SYNTAX RliQosLineRateEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of line-rate QoS entries." INDEX { rliQosLineRateInterface } ::= { rliQosLineRateTable 1 } RliQosLineRateEntry ::= SEQUENCE { rliQosLineRateInterface INTEGER, rliQosLineRateEgress INTEGER, rliQosLineRateIngress INTEGER } rliQosLineRateInterface OBJECT-TYPE SYNTAX INTEGER (1..26) ACCESS read-only STATUS mandatory DESCRIPTION "the line rate interface." ::= { rliQosLineRateEntry 1 } rliQosLineRateEgress OBJECT-TYPE SYNTAX INTEGER{ disable(0), k64(1), k128(2), k192(3),k256(4),k320(5),k484(6),k512(7), k640(8),k768(9),k896(10),m1(11),m2(12),m3(13),m4(14),m5(15),m6(16),m7(17),m8(18),m9(19),m10(20),m15(21),m20(22),m30(23),m40(24), m50(25),m60(26),m70(27),m80(28),m90(29),m100(30),m200(31),m300(32),m400(33),m500(34),m600(35),m700(36),m800(37),m900(38),m1000(39), m2000(40),m3000(41),m4000(42),m5000(43),m6000(44),m7000(45),m8000(46),m9000(47) } ACCESS read-write STATUS mandatory DESCRIPTION "The egress rate (bps) of the line-rate Qos." ::= { rliQosLineRateEntry 2 } rliQosLineRateIngress OBJECT-TYPE SYNTAX INTEGER{ disable(0), k64(1), k128(2), k192(3),k256(4),k320(5),k484(6),k512(7), k640(8),k768(9),k896(10),m1(11),m2(12),m3(13),m4(14),m5(15),m6(16),m7(17),m8(18),m9(19),m10(20),m15(21),m20(22),m30(23),m40(24), m50(25),m60(26),m70(27),m80(28),m90(29),m100(30),m200(31),m300(32),m400(33),m500(34),m600(35),m700(36),m800(37),m900(38),m1000(39), m2000(40),m3000(41),m4000(42),m5000(43),m6000(44),m7000(45),m8000(46),m9000(47) } ACCESS read-write STATUS mandatory DESCRIPTION "The ingress rate (bps) of the line-rate Qos." ::= { rliQosLineRateEntry 3 } rliQosMacLimitTable OBJECT-TYPE SYNTAX SEQUENCE OF RliQosMacLimitEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of port MAC limit table." ::= { rliSwitchQos 2 } rliQosMacLimitEntry OBJECT-TYPE SYNTAX RliQosMacLimitEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of port MAC limit entries." INDEX { rliQosMacLimitInterface } ::= { rliQosMacLimitTable 1 } RliQosMacLimitEntry ::= SEQUENCE { rliQosMacLimitInterface INTEGER, rliQosMacLimitNum INTEGER } rliQosMacLimitInterface OBJECT-TYPE SYNTAX INTEGER (1..26) ACCESS read-only STATUS mandatory DESCRIPTION "Port ID,1~4 is G.hn Port, 5~6 is RJ45 Port, 7~8 is SFP Port." ::= { rliQosMacLimitEntry 1 } rliQosMacLimitNum OBJECT-TYPE SYNTAX INTEGER (0..1024) ACCESS read-write STATUS mandatory DESCRIPTION "The limited MAC number of the port, 0 is no limit." ::= { rliQosMacLimitEntry 2 } rliQosPortTable OBJECT-TYPE SYNTAX SEQUENCE OF RliQosPortEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of port configuration QoS entries." ::= { rliSwitchQos 3 } rliQosPortEntry OBJECT-TYPE SYNTAX RliQosPortEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of line-rate QoS entries." INDEX { rliQosPortInterface } ::= { rliQosPortTable 1 } RliQosPortEntry ::= SEQUENCE { rliQosPortInterface INTEGER, rliQosPortDefaultPriority INTEGER, rliQosPortDSCP INTEGER } rliQosPortInterface OBJECT-TYPE SYNTAX INTEGER (1..26) ACCESS read-only STATUS mandatory DESCRIPTION "the port configuration interface." ::= { rliQosPortEntry 1 } rliQosPortDefaultPriority OBJECT-TYPE SYNTAX INTEGER(0..7) ACCESS read-write STATUS mandatory DESCRIPTION "The port default priority." ::= { rliQosPortEntry 2 } rliQosPortDSCP OBJECT-TYPE SYNTAX INTEGER{enable(1),disable(0)} ACCESS read-write STATUS mandatory DESCRIPTION "The port's dscp." ::= { rliQosPortEntry 3 } rliQoSSchedulingMechanismMode OBJECT-TYPE SYNTAX INTEGER{strictPriority(1),wrr(2),wdrr(3)} ACCESS read-write STATUS mandatory DESCRIPTION "QoS Scheduling Mechanism Mode." ::= { rliQoSSchedulingMechanism 1 } rliQoSQ0WRRQueuePriorityWeight OBJECT-TYPE SYNTAX INTEGER(0..127) ACCESS read-write STATUS mandatory DESCRIPTION "Q1 WRR Queue Priority Weight." ::= { rliQoSSchedulingMechanism 2 } rliQoSQ1WRRQueuePriorityWeight OBJECT-TYPE SYNTAX INTEGER(0..127) ACCESS read-write STATUS mandatory DESCRIPTION "Q2 WRR Queue Priority Weight." ::= { rliQoSSchedulingMechanism 3 } rliQoSQ2WRRQueuePriorityWeight OBJECT-TYPE SYNTAX INTEGER(0..127) ACCESS read-write STATUS mandatory DESCRIPTION "Q3 WRR Queue Priority Weight." ::= { rliQoSSchedulingMechanism 4 } rliQoSQ3WRRQueuePriorityWeight OBJECT-TYPE SYNTAX INTEGER(0..127) ACCESS read-write STATUS mandatory DESCRIPTION "Q4 WRR Queue Priority Weight." ::= { rliQoSSchedulingMechanism 5 } rliQoSQ4WRRQueuePriorityWeight OBJECT-TYPE SYNTAX INTEGER(0..127) ACCESS read-write STATUS mandatory DESCRIPTION "Q5 WRR Queue Priority Weight." ::= { rliQoSSchedulingMechanism 6 } rliQoSQ5WRRQueuePriorityWeight OBJECT-TYPE SYNTAX INTEGER(0..127) ACCESS read-write STATUS mandatory DESCRIPTION "Q6 WRR Queue Priority Weight." ::= { rliQoSSchedulingMechanism 7 } rliQoSQ6WRRQueuePriorityWeight OBJECT-TYPE SYNTAX INTEGER(0..127) ACCESS read-write STATUS mandatory DESCRIPTION "Q7 WRR Queue Priority Weight." ::= { rliQoSSchedulingMechanism 8 } rliQoSQ7WRRQueuePriorityWeight OBJECT-TYPE SYNTAX INTEGER(0..127) ACCESS read-write STATUS mandatory DESCRIPTION "Q8 WRR Queue Priority Weight." ::= { rliQoSSchedulingMechanism 9 } rliQosPortSchedulingMechanismTable OBJECT-TYPE SYNTAX SEQUENCE OF RliQosPortSchedulingMechanismEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of Transmit Queues QoS entries." ::= { rliQoSSchedulingMechanism 10 } rliQosPortSchedulingMechanismEntry OBJECT-TYPE SYNTAX RliQosPortSchedulingMechanismEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of Transmit Queues QoS entries." INDEX { rliQosPortSchedulingMechanismIndex } ::= { rliQosPortSchedulingMechanismTable 1 } RliQosPortSchedulingMechanismEntry ::= SEQUENCE { rliQosPortSchedulingMechanismIndex INTEGER, rliQosPortSchedulingMechanismPortName DisplayString, rliQoSPortSchedulingMechanismMode INTEGER, rliQoSPortQ0WRRQueuePriorityWeight INTEGER, rliQoSPortQ1WRRQueuePriorityWeight INTEGER, rliQoSPortQ2WRRQueuePriorityWeight INTEGER, rliQoSPortQ3WRRQueuePriorityWeight INTEGER, rliQoSPortQ4WRRQueuePriorityWeight INTEGER, rliQoSPortQ5WRRQueuePriorityWeight INTEGER, rliQoSPortQ6WRRQueuePriorityWeight INTEGER, rliQoSPortQ7WRRQueuePriorityWeight INTEGER } rliQosPortSchedulingMechanismIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "QoS Port Scheduling Mechanism Mode." ::= { rliQosPortSchedulingMechanismEntry 1 } rliQosPortSchedulingMechanismPortName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "QoS Port Scheduling Mechanism Mode." ::= { rliQosPortSchedulingMechanismEntry 2 } rliQoSPortSchedulingMechanismMode OBJECT-TYPE SYNTAX INTEGER{strictPriority(1),wrr(2),wdrr(3)} ACCESS read-only STATUS mandatory DESCRIPTION "QoS Port Scheduling Mechanism Mode." ::= { rliQosPortSchedulingMechanismEntry 3 } rliQoSPortQ0WRRQueuePriorityWeight OBJECT-TYPE SYNTAX INTEGER(0..127) ACCESS read-write STATUS mandatory DESCRIPTION "Port Q0 WRR Queue Priority Weight." ::= { rliQosPortSchedulingMechanismEntry 4 } rliQoSPortQ1WRRQueuePriorityWeight OBJECT-TYPE SYNTAX INTEGER(0..127) ACCESS read-write STATUS mandatory DESCRIPTION "Port Q1 WRR Queue Priority Weight." ::= { rliQosPortSchedulingMechanismEntry 5 } rliQoSPortQ2WRRQueuePriorityWeight OBJECT-TYPE SYNTAX INTEGER(0..127) ACCESS read-write STATUS mandatory DESCRIPTION "Port Q2 WRR Queue Priority Weight." ::= { rliQosPortSchedulingMechanismEntry 6 } rliQoSPortQ3WRRQueuePriorityWeight OBJECT-TYPE SYNTAX INTEGER(0..127) ACCESS read-write STATUS mandatory DESCRIPTION "Port Q3 WRR Queue Priority Weight." ::= { rliQosPortSchedulingMechanismEntry 7 } rliQoSPortQ4WRRQueuePriorityWeight OBJECT-TYPE SYNTAX INTEGER(0..127) ACCESS read-write STATUS mandatory DESCRIPTION "Port Q4 WRR Queue Priority Weight." ::= { rliQosPortSchedulingMechanismEntry 8 } rliQoSPortQ5WRRQueuePriorityWeight OBJECT-TYPE SYNTAX INTEGER(0..127) ACCESS read-write STATUS mandatory DESCRIPTION "Port Q5 WRR Queue Priority Weight." ::= { rliQosPortSchedulingMechanismEntry 9 } rliQoSPortQ6WRRQueuePriorityWeight OBJECT-TYPE SYNTAX INTEGER(0..127) ACCESS read-write STATUS mandatory DESCRIPTION "Port Q6 WRR Queue Priority Weight." ::= { rliQosPortSchedulingMechanismEntry 10 } rliQoSPortQ7WRRQueuePriorityWeight OBJECT-TYPE SYNTAX INTEGER(0..127) ACCESS read-write STATUS mandatory DESCRIPTION "Port Q7 WRR Queue Priority Weight." ::= { rliQosPortSchedulingMechanismEntry 11 } rliQosTransmitQueuesTable OBJECT-TYPE SYNTAX SEQUENCE OF RliQosTransmitQueuesEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of Transmit Queues QoS entries." ::= { rliSwitchQos 5 } rliQosTransmitQueuesEntry OBJECT-TYPE SYNTAX RliQosTransmitQueuesEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of Transmit Queues QoS entries." INDEX { rliQosPriorityIndex } ::= { rliQosTransmitQueuesTable 1 } RliQosTransmitQueuesEntry ::= SEQUENCE { rliQosPriorityIndex INTEGER, rliQosPriority INTEGER, rliQosTransmitQueues INTEGER } rliQosPriorityIndex OBJECT-TYPE SYNTAX INTEGER (1..8) ACCESS read-only STATUS mandatory DESCRIPTION "the Priority index." ::= { rliQosTransmitQueuesEntry 1 } rliQosPriority OBJECT-TYPE SYNTAX INTEGER(0..7) ACCESS read-only STATUS mandatory DESCRIPTION "The Transmit Queues priority." ::= { rliQosTransmitQueuesEntry 2 } rliQosTransmitQueues OBJECT-TYPE SYNTAX INTEGER{q0(0),q1(1),q2(2),q3(3),q4(4),q5(5),q6(6),q7(7)} ACCESS read-write STATUS mandatory DESCRIPTION "Transmit Queues." ::= { rliQosTransmitQueuesEntry 3 } rliQosDSCPMapTable OBJECT-TYPE SYNTAX SEQUENCE OF RliQosDSCPMapEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of DSCP map QoS entries." ::= { rliSwitchQos 6 } rliQosDSCPMapEntry OBJECT-TYPE SYNTAX RliQosDSCPMapEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of DSCP map QoS entries." INDEX { rliQosDSCPMapIndex } ::= { rliQosDSCPMapTable 1 } RliQosDSCPMapEntry ::= SEQUENCE { rliQosDSCPMapIndex INTEGER, rliQosDSCPMap INTEGER, rliQosDSCPMapPriority INTEGER } rliQosDSCPMapIndex OBJECT-TYPE SYNTAX INTEGER (1..64) ACCESS read-only STATUS mandatory DESCRIPTION "the port configuration interface." ::= { rliQosDSCPMapEntry 1 } rliQosDSCPMap OBJECT-TYPE SYNTAX INTEGER(0..63) ACCESS read-only STATUS mandatory DESCRIPTION "The DSCP Map." ::= { rliQosDSCPMapEntry 2 } rliQosDSCPMapPriority OBJECT-TYPE SYNTAX INTEGER(0..7) ACCESS read-write STATUS mandatory DESCRIPTION "The DSCP Map Priority." ::= { rliQosDSCPMapEntry 3 } rliSwitchMirrorTable OBJECT-TYPE SYNTAX SEQUENCE OF RliSwitchMirrorEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of mirror entries. ." ::= { rliSwitchMirror 1 } rliSwitchMirrorEntry OBJECT-TYPE SYNTAX RliSwitchMirrorEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of mirror entries." INDEX { rliSwitchMirrorIndex } ::= { rliSwitchMirrorTable 1 } RliSwitchMirrorEntry ::= SEQUENCE { rliSwitchMirrorIndex INTEGER, rliSwitchMirrorEn INTEGER, rliSwitchMirrorSourceRxPorts DisplayString, rliSwitchMirrorSourceTxPorts DisplayString, rliSwitchMirrorDestPortID INTEGER } rliSwitchMirrorIndex OBJECT-TYPE SYNTAX INTEGER { groupId (1)} ACCESS read-only STATUS mandatory DESCRIPTION "A unique index for each mirror. " ::= { rliSwitchMirrorEntry 1 } rliSwitchMirrorEn OBJECT-TYPE SYNTAX INTEGER{ enable(1), disable(2)} ACCESS read-write STATUS mandatory DESCRIPTION "Setting to disable (2) will turn off the mirror group. Setting to enable (1) will turn on the mirror group. Before enbale, you must set MirrorDestPortID first." ::= { rliSwitchMirrorEntry 2 } rliSwitchMirrorSourceRxPorts OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "Setting the bit of PortList to 1, will mirror rx packets to the monitor port on the mirror group. Each octet within this value specifies a set of eight ports, with the first octet specifying ports 1 through 8, the second octet specifying ports 9 through 16, etc. Within each octet, the most significant bit represents the lowest numbered port, and the least significant bit represents the highest numbered port. Thus, each port of the bridge is represented by a single bit within the value of this object.If that bit has a value of '1' then that port is included in the set of ports; the port is not included if its bit has a value of '0'." ::= { rliSwitchMirrorEntry 3 } rliSwitchMirrorSourceTxPorts OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "Setting the bit of PortList to 1, will mirror tx packets to the monitor port on the mirror group. Each octet within this value specifies a set of eight ports, with the first octet specifying ports 1 through 8, the second octet specifying ports 9 through 16, etc. Within each octet, the most significant bit represents the lowest numbered port, and the least significant bit represents the highest numbered port. Thus, each port of the bridge is represented by a single bit within the value of this object.If that bit has a value of '1' then that port is included in the set of ports; the port is not included if its bit has a value of '0'." ::= { rliSwitchMirrorEntry 4 } rliSwitchMirrorDestPortID OBJECT-TYPE SYNTAX INTEGER (1..26) ACCESS read-write STATUS mandatory DESCRIPTION "Monitering port ID. 1~4 is Ghn Port, 5 is RJ45/G1, 6 is RJ45/G2, 7 is Fiber/G1, 8 is Fiber/G2" ::= { rliSwitchMirrorEntry 5 } rliRebootSwitch OBJECT-TYPE SYNTAX INTEGER{ switch(1),switchAndGhn(2) } ACCESS write-only STATUS mandatory DESCRIPTION "Reboot switch and ghn node." ::= { rliAdministration 1} rliResetSwitch OBJECT-TYPE SYNTAX INTEGER{resetSwitch(1),resetSwitchAndGhn(2),defaultSwitch(3),defaultSwitchAndGhn(4)} ACCESS write-only STATUS mandatory DESCRIPTION "Reset switch and ghn node." ::= { rliAdministration 2} rliFirmwareUpdateIPAddress OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "TFTP server IP." ::= { rliFirmwareUpdate 1 } rliFirmwareFileName OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "Firmware file name." ::= { rliFirmwareUpdate 2 } rliFirmwareUpdateStart OBJECT-TYPE SYNTAX INTEGER{start(1)} ACCESS write-only STATUS mandatory DESCRIPTION "Firmware Update start." ::= { rliFirmwareUpdate 3 } rliFirmwareUpdateStatus OBJECT-TYPE SYNTAX INTEGER{notstart(0),updating(1),success(2),fail(3)} ACCESS read-only STATUS mandatory DESCRIPTION "Update firmware status." ::= { rliFirmwareUpdate 4 } rliBackupIPAddress OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "TFTP server IP." ::= { rliBackupConfiguration 1 } rliBackupFileName OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "Backup file name." ::= { rliBackupConfiguration 2 } rliBackupStart OBJECT-TYPE SYNTAX INTEGER{start(1)} ACCESS write-only STATUS mandatory DESCRIPTION "Backup start." ::= { rliBackupConfiguration 3 } rliBackupStatus OBJECT-TYPE SYNTAX INTEGER{notstart(0),updating(1),success(2),fail(3)} ACCESS read-only STATUS mandatory DESCRIPTION "Backup status." ::= { rliBackupConfiguration 4 } rliRestoreIPAddress OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "TFTP server IP." ::= { rliRestoreConfiguration 1 } rliRestoreFileName OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "Restore file name." ::= { rliRestoreConfiguration 2 } rliRestoreStart OBJECT-TYPE SYNTAX INTEGER{start(1)} ACCESS write-only STATUS mandatory DESCRIPTION "Restore start." ::= { rliRestoreConfiguration 3 } rliRestoreStatus OBJECT-TYPE SYNTAX INTEGER{notstart(0),updating(1),success(2),fail(3)} ACCESS read-only STATUS mandatory DESCRIPTION "Restore status." ::= { rliRestoreConfiguration 4 } rliPingIPAddress OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "Destination IP address." ::= { rliPing 1} rliPingIPStart OBJECT-TYPE SYNTAX INTEGER{start(1)} ACCESS write-only STATUS mandatory DESCRIPTION "Ping IP start." ::= { rliPing 2} rliPingIPResult OBJECT-TYPE SYNTAX INTEGER{noping(0),pinging(1),destinationHostUnreachable(2),thisIPisalive(3)} ACCESS read-only STATUS mandatory DESCRIPTION "Ping result." ::= { rliPing 3} rliSNTPMode OBJECT-TYPE SYNTAX INTEGER{server(0),client(1)} ACCESS read-write STATUS mandatory DESCRIPTION "SNTP mode." ::= { rliSNTP 1} rliSNTPServerAddress OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "SNTP server address." ::= { rliSNTP 2} rliSNTPMaxResponseTime OBJECT-TYPE SYNTAX INTEGER(1..59) ACCESS read-write STATUS mandatory DESCRIPTION "SNTP Max Response Time(s)." ::= { rliSNTP 3} rliSNTPTimeZoneOffset OBJECT-TYPE SYNTAX INTEGER{gmt-12(0),gmt-11(1),gmt-10(2),gmt-9(3),gmt-8(4),gmt-7(5), gmt-6(6),gmt-5(7), gmt-4(8),gmt-3(9),gmt-2(10),gmt-1(11),gmt(12),gmt1(13),gmt2(14),gmt3(15),gmt4(16), gmt5(17),gmt6(18),gmt7(19),gmt8(20),gmt9(21),gmt10(22),gmt11(23),gmt12(24)} ACCESS read-write STATUS mandatory DESCRIPTION "SNTP Time Zone Offset." ::= { rliSNTP 4} rliSNTPTimeOffset OBJECT-TYPE SYNTAX INTEGER(0..59) ACCESS read-write STATUS mandatory DESCRIPTION "SNTP Time Offset(min)." ::= { rliSNTP 5} rliSNTPYear OBJECT-TYPE SYNTAX INTEGER(2009..2035) ACCESS read-write STATUS mandatory DESCRIPTION "year." ::= { rliSNTP 6} rliSNTPMonth OBJECT-TYPE SYNTAX INTEGER(1..12) ACCESS read-write STATUS mandatory DESCRIPTION "Month." ::= { rliSNTP 7} rliSNTPDay OBJECT-TYPE SYNTAX INTEGER(1..31) ACCESS read-write STATUS mandatory DESCRIPTION "Day." ::= { rliSNTP 8} rliSNTPHour OBJECT-TYPE SYNTAX INTEGER(0..23) ACCESS read-write STATUS mandatory DESCRIPTION "Hour." ::= { rliSNTP 9} rliSNTPMinute OBJECT-TYPE SYNTAX INTEGER(0..59) ACCESS read-write STATUS mandatory DESCRIPTION "Minute." ::= { rliSNTP 10} rliSNTPSecond OBJECT-TYPE SYNTAX INTEGER(0..59) ACCESS read-write STATUS mandatory DESCRIPTION "Second." ::= { rliSNTP 11} rliSNTPApply OBJECT-TYPE SYNTAX INTEGER{apply(1)} ACCESS write-only STATUS mandatory DESCRIPTION "Set sntp." ::= { rliSNTP 12} rliIPDHCPClient OBJECT-TYPE SYNTAX INTEGER{enable(1),disable(2)} ACCESS read-write STATUS mandatory DESCRIPTION "DHCP Client." ::= { rliIPConfiguration 1} rliIPv4Address OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "Device IP address." ::= { rliIPConfiguration 2} rliIPv4Netmask OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "Device IPv4 Netmask." ::= { rliIPConfiguration 3} rliIPv4Gateway OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "Device IPv4 Gateway." ::= { rliIPConfiguration 4} rliIPv4Apply OBJECT-TYPE SYNTAX INTEGER{apply(1)} ACCESS write-only STATUS mandatory DESCRIPTION "Set device ipv4 address." ::= { rliIPConfiguration 5} rliIPv6LinkAddress OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "Device IPv6 Address." ::= { rliIPConfiguration 6} rliIPv6GlobalAddress OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "Device IPv6 Prefix." ::= { rliIPConfiguration 7} rliIPv6DelGlobalAddress OBJECT-TYPE SYNTAX INTEGER{delete(1)} ACCESS write-only STATUS mandatory DESCRIPTION "delete device ipv6 address." ::= { rliIPConfiguration 8} rliSyslogServerEnable OBJECT-TYPE SYNTAX INTEGER{disable(0),enable(1)} ACCESS read-write STATUS mandatory DESCRIPTION "Syslog Server enable." ::= { rliSyslogServer 1} rliSyslogServerIP OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "Syslog Server IP Address." ::= { rliSyslogServer 2} rliSyslogServerDestinationPort OBJECT-TYPE SYNTAX INTEGER(1..65535) ACCESS read-write STATUS mandatory DESCRIPTION "Syslog Server Destination Port." ::= { rliSyslogServer 3} rliSyslogServerLogLevel OBJECT-TYPE SYNTAX INTEGER{all(7),info(6),notification(5),warning(4),error(3)} ACCESS read-write STATUS mandatory DESCRIPTION "Syslog Server Log Level." ::= { rliSyslogServer 4} rliSFPInformationTable OBJECT-TYPE SYNTAX SEQUENCE OF RliSFPInformationEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of SFP entries." ::= { rliSwitchStatus 1 } rliSFPInformationEntry OBJECT-TYPE SYNTAX RliSFPInformationEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "List each SFP information and its status." INDEX { rliSFPIndex } ::= { rliSFPInformationTable 1 } RliSFPInformationEntry ::= SEQUENCE { rliSFPIndex INTEGER, rliSFPInterfaceName DisplayString, rliSFPBasicInfomation DisplayString, rliSFPTemperature DisplayString, rliSFPTemperatureRange DisplayString, rliSFPTxPower DisplayString, rliSFPTxPowerRange DisplayString, rliSFPRxPower DisplayString, rliSFPRxPowerRange DisplayString } rliSFPIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "A unique index for each SFP." ::= { rliSFPInformationEntry 1 } rliSFPInterfaceName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "SFP Interface Name." ::= { rliSFPInformationEntry 2 } rliSFPBasicInfomation OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "SFP basic information." ::= { rliSFPInformationEntry 3 } rliSFPTemperature OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "SFP module's temperature." ::= { rliSFPInformationEntry 4 } rliSFPTemperatureRange OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "SFP module's temperature range." ::= { rliSFPInformationEntry 5 } rliSFPTxPower OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "SFP module's Tx power." ::= { rliSFPInformationEntry 6 } rliSFPTxPowerRange OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "SFP module's TX power range." ::= { rliSFPInformationEntry 7 } rliSFPRxPower OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "SFP module's RX power." ::= { rliSFPInformationEntry 8 } rliSFPRxPowerRange OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "SFP module's RX power range." ::= { rliSFPInformationEntry 9 } rliSwitchVlanMode OBJECT-TYPE SYNTAX INTEGER{m8021Q(2),portBaseVlan(1)} ACCESS read-write STATUS mandatory DESCRIPTION "Switch Vlan Mode." ::= { rliSwitchVlan 1 } rliVLANSettingTable OBJECT-TYPE SYNTAX SEQUENCE OF RliVLANSettingEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "VLAN configuration." ::= { rliSwitchVlan 2 } rliVLANSettingEntry OBJECT-TYPE SYNTAX RliVLANSettingEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "VLAN configuration." INDEX { rliVLANIndex } ::= { rliVLANSettingTable 1 } RliVLANSettingEntry ::= SEQUENCE { rliVLANIndex INTEGER, rliVLANID INTEGER, rliVLANOperation INTEGER, rliVLANName DisplayString } rliVLANIndex OBJECT-TYPE SYNTAX INTEGER (1..64) ACCESS read-only STATUS mandatory DESCRIPTION "VLAN index." ::= { rliVLANSettingEntry 1 } rliVLANID OBJECT-TYPE SYNTAX INTEGER(0..63) ACCESS read-only STATUS mandatory DESCRIPTION "VLAN ID." ::= { rliVLANSettingEntry 2 } rliVLANOperation OBJECT-TYPE SYNTAX INTEGER{delete(0),add(1)} ACCESS write-only STATUS mandatory DESCRIPTION "Add VLAN or delete VLAN." ::= { rliVLANSettingEntry 3 } rliVLANName OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "VLAN name." ::= { rliVLANSettingEntry 4 } rliVLANPortMemberTable OBJECT-TYPE SYNTAX SEQUENCE OF RliVLANPortMemberEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "VLAN configuration." ::= { rliSwitchVlan 3 } rliVLANPortMemberEntry OBJECT-TYPE SYNTAX RliVLANPortMemberEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "VLAN configuration." INDEX { rliVLANMemberVLANIndex, rliVLANMemberPortIndex} ::= { rliVLANPortMemberTable 1 } RliVLANPortMemberEntry ::= SEQUENCE { rliVLANMemberVLANIndex INTEGER, rliVLANMemberPortIndex INTEGER, rliVLANMemberVLANID INTEGER, rliVLANMemberVLANName DisplayString, rliVLANMemberPortName DisplayString, rliVLANMemberPortsetting INTEGER } rliVLANMemberVLANIndex OBJECT-TYPE SYNTAX INTEGER (1..64) ACCESS read-only STATUS mandatory DESCRIPTION "VLAN Member VLAN Index." ::= { rliVLANPortMemberEntry 1 } rliVLANMemberPortIndex OBJECT-TYPE SYNTAX INTEGER (1..64) ACCESS read-only STATUS mandatory DESCRIPTION "VLAN Member Port Index." ::= { rliVLANPortMemberEntry 2 } rliVLANMemberVLANID OBJECT-TYPE SYNTAX INTEGER(0..63) ACCESS read-only STATUS mandatory DESCRIPTION "VLAN ID." ::= { rliVLANPortMemberEntry 3 } rliVLANMemberVLANName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "VLAN name." ::= { rliVLANPortMemberEntry 4 } rliVLANMemberPortName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "Port name." ::= { rliVLANPortMemberEntry 5 } rliVLANMemberPortsetting OBJECT-TYPE SYNTAX INTEGER{tag(1),untag(2),exclude(3),forbidden(4)} ACCESS read-write STATUS mandatory DESCRIPTION "VLAN Member Port Index." ::= { rliVLANPortMemberEntry 6 } rliVLANPortConfigurationTable OBJECT-TYPE SYNTAX SEQUENCE OF RliVLANPortConfigurationEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "VLAN configuration." ::= { rliSwitchVlan 4 } rliVLANPortConfigurationEntry OBJECT-TYPE SYNTAX RliVLANPortConfigurationEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "VLAN configuration." INDEX { rliVLANPortIndex } ::= { rliVLANPortConfigurationTable 1 } RliVLANPortConfigurationEntry ::= SEQUENCE { rliVLANPortIndex INTEGER, rliVLANPortName DisplayString, rliVLANPortPVID INTEGER, rliVLANPortLinkType INTEGER, rliVLANPortIngressFilter INTEGER, rliVLANPortFrameType INTEGER } rliVLANPortIndex OBJECT-TYPE SYNTAX INTEGER (1..64) ACCESS read-only STATUS mandatory DESCRIPTION "Port index." ::= { rliVLANPortConfigurationEntry 1 } rliVLANPortName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "Port Name." ::= { rliVLANPortConfigurationEntry 2 } rliVLANPortPVID OBJECT-TYPE SYNTAX INTEGER(1..4094) ACCESS read-write STATUS mandatory DESCRIPTION "Port PVID." ::= { rliVLANPortConfigurationEntry 3 } rliVLANPortLinkType OBJECT-TYPE SYNTAX INTEGER{hybrid(0),access(1),trunk(2)} ACCESS read-write STATUS mandatory DESCRIPTION "Port Link Type." ::= { rliVLANPortConfigurationEntry 4 } rliVLANPortIngressFilter OBJECT-TYPE SYNTAX INTEGER{disable(0),enable(1)} ACCESS read-write STATUS mandatory DESCRIPTION "Port Ingress Filter." ::= { rliVLANPortConfigurationEntry 5 } rliVLANPortFrameType OBJECT-TYPE SYNTAX INTEGER{admitAll(0),admitOnlyTagged(1)} ACCESS read-write STATUS mandatory DESCRIPTION "Port Ingress Filter." ::= { rliVLANPortConfigurationEntry 6 } rliVLANListTable OBJECT-TYPE SYNTAX SEQUENCE OF RliVLANListEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "VLAN configuration." ::= { rliSwitchVlan 5 } rliVLANListEntry OBJECT-TYPE SYNTAX RliVLANListEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "VLAN List." INDEX { rliVLANListIndex } ::= { rliVLANListTable 1 } RliVLANListEntry ::= SEQUENCE { rliVLANListIndex INTEGER, rliVLANListVID INTEGER, rliVLANListVLANName DisplayString, rliVLANListVLANType INTEGER, rliVLANListTagged DisplayString, rliVLANListUntagged DisplayString, rliVLANListForbidden DisplayString } rliVLANListIndex OBJECT-TYPE SYNTAX INTEGER (1..64) ACCESS read-only STATUS mandatory DESCRIPTION "VLAN List Index." ::= { rliVLANListEntry 1 } rliVLANListVID OBJECT-TYPE SYNTAX INTEGER (1..64) ACCESS read-only STATUS mandatory DESCRIPTION "VID." ::= { rliVLANListEntry 2 } rliVLANListVLANName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "VLAN Name." ::= { rliVLANListEntry 3 } rliVLANListVLANType OBJECT-TYPE SYNTAX INTEGER{static(0),dynamic(1),mvrvlan(3)} ACCESS read-only STATUS mandatory DESCRIPTION "VLAN Type." ::= { rliVLANListEntry 4 } rliVLANListTagged OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "VLAN Tagged member." ::= { rliVLANListEntry 5 } rliVLANListUntagged OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "VLAN Untagged member." ::= { rliVLANListEntry 6 } rliVLANListForbidden OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "VLAN Forbidden member." ::= { rliVLANListEntry 7 } rliTemperature-Alarm TRAP-TYPE ENTERPRISE rliTrapIDs DESCRIPTION "Temperature alarm when it's abnormal." ::= 61 rliPower-Alarm TRAP-TYPE ENTERPRISE rliTrapIDs DESCRIPTION "Power alarm when it's abnormal." ::= 62 rliFan-Alarm TRAP-TYPE ENTERPRISE rliTrapIDs DESCRIPTION "Fan alarm when it's abnormal." ::= 63 rliRisingThreshold-Alarm TRAP-TYPE ENTERPRISE rliTrapIDs DESCRIPTION "The sampled statistic value is greater than or equal to the preset upper threshold. This trap comes from RMON-EventAlarm" ::= 64 rliFallingThreshold-Alarm TRAP-TYPE ENTERPRISE rliTrapIDs DESCRIPTION "The sampled statistic value is less than or equal to the preset lower threshold. This trap comes from RMON-EventAlarm" ::= 65 linkUp TRAP-TYPE ENTERPRISE rliTrapIDs DESCRIPTION "G.hn client is up." ::= 66 linkDown TRAP-TYPE ENTERPRISE rliTrapIDs DESCRIPTION "G.hn client is down." ::= 67 rliGhnMemoryAlarm TRAP-TYPE ENTERPRISE rliTrapIDs DESCRIPTION "G.hn memory is abnormal." ::= 68 rliGhnMemoryNormal TRAP-TYPE ENTERPRISE rliTrapIDs DESCRIPTION "G.hn memory is normal." ::= 69 rliSwitchMemoryAlarm TRAP-TYPE ENTERPRISE rliTrapIDs DESCRIPTION "The switch memory is abnormal." ::= 70 rliSwitchMemoryNormal TRAP-TYPE ENTERPRISE rliTrapIDs DESCRIPTION "The switch memory is normal." ::= 71 rliSwitchTemperatureAlarm TRAP-TYPE ENTERPRISE rliTrapIDs DESCRIPTION "The switch temperature is abnormal." ::= 72 rliSwitchTemperatureNormal TRAP-TYPE ENTERPRISE rliTrapIDs DESCRIPTION "The switch temperature is normal." ::= 73 rliSwitchCPUUtilAlarm TRAP-TYPE ENTERPRISE rliTrapIDs DESCRIPTION "The switch CPU utilization is abnormal." ::= 74 rliSwitchCPUUtilNormal TRAP-TYPE ENTERPRISE rliTrapIDs DESCRIPTION "The switch CPU utilization is normal." ::= 75 rliGhnCPUUtilAlarm TRAP-TYPE ENTERPRISE rliTrapIDs DESCRIPTION "The G.hn CPU utilization is abnormal." ::= 76 rliGhnCPUUtilNormal TRAP-TYPE ENTERPRISE rliTrapIDs DESCRIPTION "The G.hn CPU utilization is normal." ::= 77 rliSwitchSession TRAP-TYPE ENTERPRISE rliTrapIDs DESCRIPTION "The switch session status." ::= 78 rliGhnReboot TRAP-TYPE ENTERPRISE rliTrapIDs DESCRIPTION "G.hn is rebooting." ::= 79 rliGhnReset TRAP-TYPE ENTERPRISE rliTrapIDs DESCRIPTION "G.hn is resetting." ::= 80 rliSwitchReboot TRAP-TYPE ENTERPRISE rliTrapIDs DESCRIPTION "The switch is rebooting." ::= 81 rliSwitchReset TRAP-TYPE ENTERPRISE rliTrapIDs DESCRIPTION "The switch is resetting." ::= 82 rliGhnUpgradeWillRestart TRAP-TYPE ENTERPRISE rliTrapIDs DESCRIPTION "G.hn has completed the upgrade and will restart." ::= 83 rliGhnUpgradeRestarted TRAP-TYPE ENTERPRISE rliTrapIDs DESCRIPTION "G.hn has completed the upgrade and restarted." ::= 84 rliPortPowerExceedBudget TRAP-TYPE ENTERPRISE rliTrapIDs DESCRIPTION "Power of port exceed budget." ::= 85 rliPortPowerRestoredFromExceeded TRAP-TYPE ENTERPRISE rliTrapIDs DESCRIPTION "Power of port restored to normal from exceeded." ::= 86 rliPortPowerOverload TRAP-TYPE ENTERPRISE rliTrapIDs DESCRIPTION "Power of port overload." ::= 87 rliPortPowerRstoredFromOverload TRAP-TYPE ENTERPRISE rliTrapIDs DESCRIPTION "Power of port restored to normal from overload." ::= 88 rliSwitchPortDownSpeed TRAP-TYPE ENTERPRISE rliTrapIDs DESCRIPTION "Negotiate port speed to be less than the maximum speed." ::= 89 END