Customer story · Service provider

Midco modernized 1,100+ properties on the coax already in the walls

With ReadyLinks switching and ReadyView cloud management, Midco brings gigabit broadband and IPTV to hotels, senior living communities, apartment buildings, college dorms and more, without rewiring a building.

Every kind of property, one wire

Midco, the broadband provider headquartered in Sioux Falls, South Dakota, is modernizing the in-building networks across its hospitality footprint. Using ReadyLinks hardware and the ReadyView cloud platform, Midco delivers gigabit broadband and IPTV over the coaxial cable already installed in each building.

  • Hotels
  • Senior living
  • Apartment communities
  • Colleges
  • Dorms
  • Gyms
  • Bowling alleys

No walls are opened and no new cable is pulled. The rollout was designed with ReadyLinks channel partner RocNet Supply, which built an open, repeatable deployment model around ReadyLinks technology.

Modernizing 1,100 buildings one rewire at a time would have taken years of construction, tenant disruption and negotiation with property owners. ReadyLinks turns the same job into an equipment swap at the head end and a small device in each unit.

The challenge

1,100 buildings wired for cable TV

Most of these properties were wired for cable TV decades ago. Every room, unit and suite has a coax outlet, but the building has no Ethernet to carry modern broadband. The traditional fix is to rewire, and at this scale that breaks down.

Construction in occupied buildings

Opening walls and ceilings, patching drywall and working around the people who live and stay there.

Property owner friction

Every building needs its own approvals, access windows and disruption negotiations.

Cost per property

Cable, materials, remediation and contractor labor add up to thousands of dollars per building before a single subscriber is lit.

Time

At 1,100+ properties, a rewire program is measured in years, and subscribers wait the whole time.

Lock-in

Proprietary in-building systems tie the operator to one vendor's roadmap and pricing.

The solution

New electronics, same coax

ReadyLinks replaces the electronics, not the wiring. Fiber brings Midco's service to the building, and ReadyLinks carries it the rest of the way over the coax already in the walls, as multi-gigabit Ethernet.

The fiber stops at the building. ReadyLinks carries it the rest of the way on the coax that is already there.

The hardware

A switch at the head end, a client on every outlet

GL-6xC

Coax switch for larger properties

Six ReadyLink coax ports drive Ethernet over the building's existing coax. Each port runs through the existing splitters to serve up to 16 units.

GL-6xC details
GL-4xCEFH-RPF

Compact switch that needs no power drop

Four coax ports and a 10G fiber uplink in a compact chassis. The unit clients can power it back over the coax, so it installs where the coax splits with no new power circuit.

GL-4xCEFH-RPF details
IPC-1CP-RPF

Unit client on the coax outlet

Connects to the coax outlet in each unit and gives the tenant's router or Wi-Fi access point a 2.5GbE PoE++ port, good for about 1.5/1.5 Gig on a speed test.

IPC unit clients
The software

1,100 properties, one screen

Rolling out is half the job. Every ReadyLinks switch and unit client lands in ReadyView, where Midco's teams provision, monitor and update the fleet from one place.

ReadyView digital twin of a site, showing each switch and the clients connected to it

See every building as it is wired

Each property's network is drawn live, from the head-end switch to every unit client. A technician sees what is connected, and what is not, before rolling a truck.

ReadyView automation scripts for configuration templates, firmware upgrades and bandwidth limits

Change the whole fleet at once

Configuration templates, firmware upgrades and scripted changes run across every site from one place, instead of one switch at a time.

ReadyView Switch Health learning a switch's normal traffic

Spot trouble before tenants call

Switch Health learns what normal traffic looks like on each switch and flags when something changes, and ReadyView emails the team an alert.

The result

Why it scaled to 1,100+ properties

Without hardware that reuses the existing coax and software that manages it all from one place, a program this size would have been extremely difficult. With ReadyLinks, each property is a repeatable install instead of a custom construction project.

Proven first, then repeated

The design was validated in demanding collegiate arena environments before it rolled out across residential and commercial properties.

Install once, grow by the unit

The switch goes in once. After that, moving a subscriber over is a few minutes of work at the head end and in their unit.

Thousands saved per property

No cable, drywall repair or construction crews means the savings start before the first subscriber is lit.

Occupied buildings stay undisturbed

Residents, guests and students carry on as normal, which keeps property owners on side.

Open by design

Standard Ethernet and fiber uplinks work with any optical and core equipment, so Midco keeps its own network choices.

“Using the existing wiring completely changed the economics of these deployments. Our installation teams were able to modernize buildings quickly without the disruption, cost, or complexity of rewiring.”

Eric TijerinaSr. Director of Access Network Engineering, Midco

“Every one of Midco's buildings already had a wire running to every unit. Our job was to make that wire carry gigabit service and to give Midco one place to run all of it. Modernizing 1,100 properties the old way would have meant years of construction. With ReadyLinks hardware and ReadyView, it is a repeatable install that Midco's teams can do building after building.”

Garrett SynstelienVP Sales Engineer, ReadyLinks

Designed with RocNet Supply. ReadyLinks channel partner RocNet Supply built the open, repeatable deployment model around ReadyLinks technology and supports the rollout. Read RocNet's case study

Modernizing a portfolio of properties?

Tell us what's in your walls. Chances are the wire you need is already there.